Gallant Autonome

The standard version of the Gallant Autonome dental unit:

• Floor-mounted soundproof hydroblock.
• Floor-mounted or suspended “STING” dental chair (Tecnodent Italy).
• (EKOM DK60 Slovakia) oil-free compressor with corrosion-resistant five litre tank, and an automatic condensate drain.
• Cuspidor valve with a place selection valve (DÜRR DENTAL Germany).
• An amalgam separator “CAS 1” (DÜRR DENTAL Germany).
• A “Luzzani” suction unit with a bactericidal filter mounted in a hydroblock (Luzzani Dental Italy).
• “Durr Comfort” assistant’s table with big and small suction hoses (DÜRR DENTAL Germany).
• Ceramic spittoon bowl (Tecnocer Italy) with rinsing and cup filling electronic control.
• Two litre distilled water tank.
• Six litre water tank for flushing the cuspidor, and filling the rinsing glass.
• Five litre capacity secretions receptacle.
• EDI(Faro Italy) dental lamp on a hydroblock unit.
• Pneumatic foot control.

Dentist’s table with upper or lower delivery of hoses on pantograph arm with pneumatic brake including:

• X-ray viewer (negatoscope with LED lighting).
• Control panel (touchpad) to control arm-chair and operation with adjustment all dynamic instruments power and Endo function.
• 3-way syringe DCI.
• One pneumatic line (high-speed handpiece silicone hose).
• Special big table with silicone mat.
• Special big table with stainless steel tray.

STING (Tecnodent Italy) patient arm-chair including:

• Completely electromechanical lifting and backrest movements.
• Program for “0” position reset.
• Rinse position.
• Dual foot-controls on base.
• Safety stop on base.
• Safety stop on backrest.
• Wide armchair backrest.
• Flat headrest rotatable in one plane.

Additional options are also possible. For more information, please contact us.

For dentist’s table:

• Second pneumatic line without FO (fibre optic).
• Second pneumatic line with FO (fibre optic).
• Replacement of non-FO pneumatic lines with FO (fibre optic).
• Micromotor MC2 (Bien Air Swiss).
• Second Micromotor MC2 (Bien Air Swiss).
• Micromotor MC2 LED (Bien Air Swiss).
• Second Micromotor MC2 LED (Bien Air Swiss).
• Micromotor MC3 LK (Bien Air Swiss).
• Second Micromotor MC 3 LK (Bien Air Swiss).
• Micromotor MC3 LED (Bien Air Swiss).
• Second Micromotor MC 3 LED (Bien Air Swiss).
• Micromotor MX2 OptimaINT (40 programs) (Bien Air Swiss).
• Second Micromotor MX2 (Bien Air Swiss).
• Micromotor MX2 LED (Bien Air Swiss).
• Second Micromotor MX2 LED (Bien Air Swiss).
• Micromotor MCX OptimaINT (40 programs) (Bien Air Swiss).
• Micromotor MCX (1000 – 40000 rpm) (Bien Air Swiss).
• Second Micromotor MCX (1000 – 40000 rpm) (Bien Air Swiss).
• Micromotor MCX LED (1000 – 40000 rpm) (Bien Air Swiss).
• Second Micromotor MCX LED (1000 – 40000 rpm) (Bien Air Swiss).
• Module with piezoelectric scaler Xinetic without light with 3 inserts (Satelec/Acteon).
• Module with piezoelectric scaler Xinetic with lighting with 3 inserts (Satelec/Acteon).
• Module with piezoelectric Mectron scaler with 3 inserts (Satelec/Acteon).
• Module with piezoelectric SP NEWTRON scaler without light with 3 inserts (Satelec/Acteon).
• Module with piezoelectric SP NEWTRON scaler with LED light with 3 inserts (Satelec/Acteon).
• Module with piezoelectric EMS scaler with 3 inserts.
• Module with piezoelectric TKD scaler with 3 inserts.
• Module with curing light STARLIGHT Sx5 (Mectron Italy).
• Peristaltic pump “Satelec” and rod for container (Satelec)..
• Curing lamp for incorporation Mini LED (Mectron Italy).
• Replacement of syringe with Minimate 3-way.
• Replacement of syringe with Mimilate 6-way.
• Apex locator (Yoshida Dental).
• Water heater for doctor table instruments (Denlux Denmark).
• Special big tray with 2 stainless steel trays.

For the hydroblock:

• Replacement of syringe with Minimate 3-way (Luzzani Dental Italy).
• Replacement of syringe with Minilate 6-way (Luzzani Dental Italy).
• Curing light STARLIGHT Sx5 (Mectron Italy).
• Rotary arm for monitor attachment.
• Water Heater “DENLUX” for the cup filler (Denlux Denmark).
• Replacement of the “FARO EDI” lamp on the “FARO ALYA LED” (Faro Italy).
• Replacement of the “FARO EDI” lamp on the “FARO MAIA LED” (Faro Italy).
• Metal plate on the floor for fastening the installation and chair.
• Replacement of pneumatic foot control by multifunctional foot control “FARO”.

For dental chair:

• Replacement of the chair STING on the chair ECO.NEXT (Tecnodent Italy) for floor-mounted dental chair only.
• Replacement of the chair upholstery on Memory Foam.
• Replacing of the chair upholstery on Soft Foam.
• Left rotary, detachable armrest.
• Right rotary, detachable armrest.
• Rotation of the seat (plus, minus 30 °) relative to the vertical.
• Magnetic pillow “C95”.
• UNI headrest.
• Trendelenburg position (at 15°, with automatic compensation of the backrest for a correct blood flow during the treatment).
• 3 programmable working positions.
• Narrow backrest ECO.NEXT only (Tecnodent Italy).